Telephone
86-577-67988267
Product
Current location:Home > Product
YW (NON-CLOG SUBMERSIBLE SEWAGE PUMP :SINGLE-PIPE)
 
PRODUCT PROFILE
YW series non-clog submersible sewage pumps are optimized on the base of WQ submerged motor pump according to users’ practical demands, installation and service conditions and modes, combined with years of experience. With easy installation and operation as well as reasonable structure, this series has eliminated the disadvantage of motor burning as a result of water leakage of mechanical seal.
 
APPLICABILITY
YW series non-clog submersible sewage pumps are applicable for the discharge of seriously polluted wastewater in factories and commercial sites, sewage draining station in residential area, draining station for civil defense, water supply in tap water plant, sewage drainage in hospitals and hotels, construction site of municipal projects, exploration, mines, rural methane pool, etc. to deliver wastewater and pollutants containing granules, as well as clean water and weak corrosive mediums.
 
SERVICE CONDITIONS
1. Ambient temperature≤40℃, humidity≤95% and height above sea level≤1,000 meters. If beyond, clarify when placing an order.
2. Medium temperature not exceeding 60℃ and medium weight from 1~1.3kg/dm3.
3. The applicable scope of cast-iron material is from PH5~9
4. For 1Cr18Ni9Ti stainless steel material, ordinary corrosive medium may be used.
5. The height above sea level of service location should not exceed 1,000 meters. If beyond, clarify when placing an order for our convenience to provide you with more reliable products.
Note: If there are special requirements on temperature and mediums, please clarify the detail of the medium to deliver when placing an order for our convenience to provide you with more reliable products.
 
PRODUCT FEATURE
1. Its unique single-vane or double-vane impeller structure contributes much to pollutant handling capacity. It enable to effectively deliver fibers 5 times of pump caliber and solid granules of diameter at 50% of pump caliber.
2. Its mechanical seal uses late-model corrosion resistant carbon tungsten hard alloy for long-term operation in oil chamber and safe service of continuously more than 8,000 hours.
3. Compact overall structure, small volume, low noise, distinctive energy saving, easy maintenance, use of standard Y series motor for the convenience of making replacement.
4. The automatic control cabinet may automatically control the start and stop of pump responding to the change of required liquid level. It is fairly easy to use with no need for a special person to care about it.
5. Square and circular installation systems are available if required, making installation and maintenance much convenient, so that is no need for a person to go into sewage pit.
6. It can be used within full head extent and prevent motor from over load.
7. This pump is provided with outdoor motor, with no need for a pump room. It may be directly installed outdoors to save expenses.
8. This pump takes a vertical structure. While in service, pump body is submerged in medium, so that it is easy to start. It is also characterized by no leakage. The underwater depth ranges from 0.5~9 meters, varying from pump types.
 
50HZ Pump Performance Scope
Caliber (mm)
Pump Series
Rated Follow Range (m3/h)
Rated Head  Range (m)
Power Range (kW)
25
25YW
8
12-22
0.75-11
32
32YW
8
12-22
0.75-11
40
40YW
12
15
1.5
50
50YW
10-40
7-40
0.75-7.5
65
65YW
8
12-22
0.75-11
80
80YW
40-80
7-25
2.2-7.5
100
100YW
60-100
7-35
3-18.5
150
150YW
110-200
9-40
7.5-45
200
200YW
250-400
7-60
0.75-75
250
250YW
600
9-25
30-75
300
300YW
480-950
12-24
45-110
350
350YW
1100-1500
7-26
45-160
400
400YW
1690-2500
6-32
55-250
450
450YW
2100-2300
10-36
90-315
500
500YW
2400-2650
10-28
110-280
600
600YW
3500-5400
8-15
185-200
 

Prev:

Next: